How much does a steel coil weigh, and which truck fits?

A steel coil weighs anywhere from about 3,000 lb for a narrow slit coil to more than 60,000 lb for a large master coil, and the weight comes from 3 numbers: outside diameter, inside diameter and width. A coil up to 46,000 lb rides on a tandem. Heavier coils, or 2 coils that total more than 46,000 lb, go on a 6 axle that carries up to 88,000 lb inside Ontario.

A wrapped steel coil chained down on a Fission flatbed

The weight on the mill tag is the number that counts. When the tag is not in front of you, the size of the coil gets you close enough to pick the truck and ask for a quote.

The formula

For carbon steel, measured in inches:

Weight in lb = (OD x OD minus ID x ID) x width x 0.2227

OD is the outside diameter, ID is the inside diameter (the eye) and width is the width of the strip. The 0.2227 comes from the density of carbon steel, 0.2836 lb per cubic inch, times the share of a square that a circle fills. A coil 60 inches across with a 24 inch eye and a 48 inch width works out to (3,600 minus 576) x 48 x 0.2227, or about 32,300 lb.

The formula treats the coil as solid steel, so a loosely wound coil weighs a little less than the math says. Stainless is within about 2 percent of that either way, depending on the grade. Aluminum is about one third the weight of steel at the same size. Use the tag weight when you have it.

Steel coil weight by size

Outside diameterEyeWidthAboutTruck
40 in20 in12 in (slit coil)3,200 lbSeveral to a load on a tandem flatbed or Conestoga
48 in20 in36 in15,300 lbTandem, 2 coils to a load
60 in24 in48 in32,300 lbTandem for 1 coil. 6 axle for 2
72 in24 in48 in49,300 lb6 axle
72 in24 in60 in61,600 lb6 axle
72 in20 in72 in76,700 lb6 axle, Ontario and Michigan only

Weights are for carbon steel from the formula above, rounded to the nearest 100 lb.

Which truck the weight needs

A 53 ft tandem is built to the 80,000 lb gross weight that is legal in both Canada and the US, which leaves about 46,000 lb for freight. That covers one master coil of ordinary size, or a load of smaller and slit coils.

Past 46,000 lb the choice is 2 tandems or 1 multi axle. Our 6 axle curtainsides carry up to 88,000 lb inside Ontario and into Michigan, and up to 76,000 lb into Ohio and Indiana. Inside Ontario that is legal weight for the configuration, so there is no overweight permit. Two 32,300 lb coils are 64,600 lb: 2 trucks on tandems, 1 truck on a 6 axle. Why a 6 axle moves 88,000 lb has the detail.

A load heavier than 88,000 lb is quoted after dispatch checks the permit route.

The 5,000 lb line

Weight also decides how the coil is tied down. In Canada and the US, a coil or group of coils that weighs 2,268 kg (5,000 lb) or more has to be secured to the metal coil rules: the metal coil section of National Safety Code Standard 10 in Canada and section 393.120 of the US federal regulations. Below that weight the general cargo rules apply. The coil rules set the chains by which way the eye faces: eye to the side, eye to the front or eye to the sky.

Every Fission flatbed and Conestoga carries coil racks, timbers and chains, so the eye direction you ship is the one we secure. How each one is chained is on the load securement page.

Covered or open

Weight picks the axles. The finish picks the cover. Cold rolled, galvanized and coated coil should ride dry, and 110 of our 140 trailers are curtainside, so it rides dry with no tarp touching the steel. Road salt and tarping covers the winter side of that.

What to send for a coil quote

  • Number of coils and the weight of each, from the tag if you have it
  • Outside diameter and width
  • Which way the eye faces as shipped
  • How it loads and unloads: crane from the top, or forklift from the side
  • Covered or open
  • Pickup and delivery points, and the pickup date

Send it through the form on this page or call dispatch, and a dispatcher prices it within 1 business hour, 7 am to 5 pm ET, Monday to Friday.

Questions shippers ask

How much does a steel coil weigh?

From about 3,000 lb for a narrow slit coil to more than 60,000 lb for a large master coil. A coil 60 inches across with a 24 inch eye and a 48 inch width weighs about 32,300 lb.

How do you calculate the weight of a steel coil?

In inches: outside diameter squared, minus inside diameter squared, times the width, times 0.2227. The answer is in pounds for carbon steel. The mill tag weight is more exact and is the one to use when you have it.

How many steel coils fit on one truck?

It goes by weight, not deck space. A tandem carries about 46,000 lb, so 1 large coil or several small ones. A Fission 6 axle carries up to 88,000 lb inside Ontario and into Michigan, so 2 coils of about 40,000 lb ride on 1 truck.

Does a heavy coil need an overweight permit?

Not up to 88,000 lb on a 6 axle inside Ontario. That is legal weight for the configuration. Heavier loads are quoted after dispatch checks the permit route.

Sources: National Safety Code Standard 10, Cargo Securement (metal coils), and 49 CFR 393.120 for the 2,268 kg (5,000 lb) line. The formula uses the density of carbon steel, 0.2836 lb per cubic inch. Payloads are Fission's own equipment. Other carriers' trailers differ.

More from the yard

All posts

Quote a coil load

A dispatcher prices it within 1 business hour, 7 am to 5 pm ET, Monday to Friday.

* means required

Add equipment, date and load details optional

Or call dispatch, (905) 799 7900, press 1, 24 hours. Already booked? Track your load.

4.6 stars on Google. Read the reviews.

Liability and claims are covered in our shipping terms.

Need a truck this week?

Send the lane and the weight. A dispatcher prices it within 1 business hour, and someone picks up the phone 24 hours a day.